This forum software has now been archived into static HTML page (i.e. it does not function as a working forum anymore, so you cannot login.)
In due course a new forum will be available to help support newer CamStudio versions.
Sorry for the inconvenience and thank you for your patience.
In due course a new forum will be available to help support newer CamStudio versions.
Sorry for the inconvenience and thank you for your patience.
RealTek HD Audio does not work
I have been using CamStudio for some time now. However, after I got a new Hard Drive I decided to download CamStudio again (as It worked very well last time). Now however, I have discoverd that my CamStudio will not record sound from my RealTek HD Audio Output and Input. I have tried both of these and they don't work as it cannot fnd a line. When I click on "Record Audio from Speakers" I get an error message saying "WaveoutGetSelectControl()failed". This also happens when I ask CamStudio to automatically detect my Audio Line. When I ask to do it manually I am given the following message: "Unable to detect recording line for speakers. Please make sure your soundcard is seleced correctly in the 'Soundcard Device' of 'Audio options for speakers'. The sound used to work when I used my other computer, this computer is the same as the previous one (same soundcard, video card ect.) just a different Hard Drive. I do not know why it is not working this time around, I would welcome any help. :)
Comments
1. Open "Control Panel"
2. Double-click the "Sounds and Audio Devices" icon
3. Click the "Audio" tab
4. Under "Sound Recording", hit the "Volume..." button. The "Recording Control" window should pop up.
5. In the Recording Control window, hit Options, then Properties in the menu bar.
6. Under "Show the following volume controls" make sure "Stereo Mix" is checked.
7. Close the Properties window, then make sure "Select" under "Stereo Mix" is checked.
8. Hit "Ok."
I'm fresh caught to CS 2.5. l'm still having troubles with the audio. The sad thing is that it worked for me when using CS 2.5 Beta on smaller clips but l upgraded to 2.5 and l seem to have lost audio. I'm running XP Home (sp3). I followed the instructions above from jmcruz12 (thank you), but to no avail.
I've even gone back to the beta version - no audio. I admit, l'm confused.Any thoughts?
For people using Reltek HD Audio Input you need to enable stereo mix and then unmute it!:
FINALLY! I HAVE A SOLUTION!
1. Enter the Reltek HD Audio Manager.
2. Click on the "Mixer" Tab.
3. Under the "Record" section you will see a little spanner, click it.
4. Make sure "Stereo Mix" is checked and click ok.
5. Then, in the "Record" Section look for "Stereo Mix" and unmute it!
Problem solved!
This worked with "Reltek HD Audio Input" on XP sp3.
I hope this helps, it sure helped me!
One question though: is Stereo Mix supposed to show up in CamStudio under Audio option for speakers? Because it doesn't...
I use realtek too, so I have the same problem. I tried to do your solutions but I have another problem ...
You solutions are on windows XP, I'm on windows 7. Plus, since I'm French, all of realtek settings are in French, so I'm completely lost in your explainations.
"1. Enter the Reltek HD Audio Manager.
2. Click on the "Mixer" Tab."
please could you post a screenshot of this window ? It would really help me ;)
thanks.
I was having the same problem with Win 7 so I had to do some digging. I did get it to work in the end so I will try to help you. The help for Win XP is close, but Win 7 looks a little different. One big difference for me is, there is no 'mixer' in my Realtek setup.
I had to go through the Hardware -> Manage Audio Devices. In there, go to the 'recording' tab, select your microphone, and 'configure' it. Setting this up got it working for me instantly. I hope this helps you.
I hope that Office Word 2007 translates this correctly! I do not speak French, but I will do what I can.
I took a screenshot, but I do not see a way to post it. Sorry.
J'esp
To upload screenshot, you can upload on Imagilive and put here the link to the picture.
I'm trying to do the same as you did, could you explain what you did exactly by "configuring it" ?
Here is a screen shot of how I got it to work.
http://www.texturenook.com/index.php?p=1_5_Helpful-Stuff
but thanks a lot for having helped ;)
Go to the Control Panel, Sound.
On the second tab, Recording, make your Microphone (USB) the default, and it worked for me.
Thanks so much for the posts in this thread and in the "WaveoutGetSelectControl() failed" thread for giving me hints on how to troubleshoot.
i dont have stereo mix, i have just CD volume, mic volume and line volume
i use Realtek HD Audio , and i dont found it. Can anyone help me?
Thank you!
1x1x1x1
http://www.google.com/search?q=radio+shack+attenuating+patch+cord
http://www.radioshack.com/product/index.jsp?productId=2103841(in-store only)
Terry
For Windows 7 -
For Windows vista -
So I tried it again, but didn't hear any sound and then the same error message. I thought maybe I needed to reboot after installing, so I uninstalled and rebooted, then installed and rebooted. Same problem.
Then I found there was no sound to my speakers except when booting, the bios controlled "rebooting" message worked, meaning there wasn't a speaker connection problem.
Long story, I used a previous restore from two days earlier and everything worked. I since repeated all this and had the same results. Even re-installing the Realtek AC97 drivers didn't help.
Any idea what is causing the problem? CamStudio works otherwise?
You may try re-installing the 2008 MS C++ runtime files (not 2010)
http://www.microsoft.com/download/en/details.aspx?id=5582
Terry
I've not ever heard of the 2008 versions competing with the 2010 ones, that is, I've never heard of it breaking any other runtime dependent programs. If you find a reference, please do let me know about the instance!
Terry
I take it you mean you have the same problem as jaf.
Have you tried running the program as an administrator yet? (Right-click on the program icon and select the top choice.)
Terry
I have now found out that it is because of the quality of the sound settings in Realtek Audio Manager. To fix it, this is what I did. Go to your Realtek Audio Manager in the Control Panel and under the Speaker tab, select the default format tab. Change it to the first one on the list, 16 bits, 44100 Hz CD Quality. Do the same under the Stereo Mix tab (or whatever it is called in your setup). Now in Camstudio under Audio Options, set the recording format to be the same as in Realtek, which is the bottom one in the list. Make PCM your compressor. This fixed this problem for me. I may make a video tutorial of this later on.
I would strongly suggest checking the Toshiba site for updates or the Realtek site or whatever your computer or sound card manufacturer is to make sure you have the latest drivers instead of allowing Windows update to leave you with something that does not work.
If you cannot find the stereo mix option, this is likely the fix you need